Garmin fenix Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Ver Garmin fenix. Garmin fenix 18 páginas. Turn on smart watch of 2022 - go wiki
También para Garmin fenix: Manual de introducción (4 páginas), Manual del usuario (22 páginas), Manual de inicio rápido (18 páginas), Faq (5 páginas), Cómo hacerlo (8 páginas)

Imprimir página

Alerts

You can set the device to alert you in many different situations

where your awareness of the surrounding conditions or other

data is important. There are three types of alerts: event alerts,

range alerts, and recurring alerts.

Event alert: An event alert notifies you once. The event is a

specific value. For example, you can set the device to alert

you when you reach a specified elevation.

Range alert: A range alert notifies you any time the device is

above or below a specified range of values. For example,

you can set the device to alert you when your heart rate is

below 60 bpm (beats per minute) and over 210 bpm.

Recurring alert: A recurring alert notifies you every time the

device records a specified value or interval. For example,

you can set the device to alert you every 30 minutes.

Alert Name Alert Type

Proximity

Recurring

Distance

Event,

recurring

Time

Event,

recurring

Elevation

Event, range,

recurring

Nav. Arrival Event

Pace

Range

Heart Rate Range

Cadence

Range

Battery

Event

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified

range of a particular location.

Select the Orange key.

Select Alerts > Proximity > Create New.

Select a location.

Enter a radius.

Select Done.

Calculating the Size of an Area

Before you can calculate the size of an area, you must acquire

satellites

(page

2).

Select the Orange key.

Select GPS Tools > Area Calc..

Walk around the perimeter of the area you want to calculate.

When you are finished, select the Orange key to calculate

the area.

Select an option:

• Select Save Track, enter a name, and select Done.

• Select Change Units to convert the area to a different

unit.

• Select

to exit without saving.

Viewing the Almanacs

You can view almanac information for the sun and moon, and

hunting and fishing.

Select the Orange key.

ANT+™ Sensors

Description

See

page

You can set an interval or a custom

distance from your final destination.

You can set an interval or a custom time

from your estimated time of arrival.

You can set minimum and maximum

elevation values. You can also set the

device to alert you when you ascend or

descend a specified amount.

You can set alerts for reaching waypoints

and the final destination of a track or

route.

You can set minimum and maximum pace

values.

You can set minimum and maximum

heart rate values or select zone changes

(page

8).

You can set minimum and maximum

cadence values.

You can set a low battery power alert.

Select an option:

• To view the sunrise, sunset, moonrise, and moonset

information, select GPS Tools > Sun & Moon.

• To view the predicted best times for hunting and fishing,

select GPS Tools > Hunt & Fish.

If necessary, select

Viewing Satellite Information

The satellite page shows your current location, GPS accuracy,

satellite locations, and signal strength.

Select the Orange key.

Select Start GPS.

Select the Orange key.

Select GPS Tools > Satellite.

Select

to view additional information.

Simulating a Location

When you are planning routes or activities in a different area,

you can turn off GPS and simulate a different location.

Select the Orange key.

Select Setup > System > GPS Mode > Demo Mode.

Select a location.

Select Go > Move to Location.

ANT+™ Sensors

The device is compatible with these optional, wireless ANT+

accessories.

• Heart rate monitor

(page

• GSC™ 10 speed and cadence sensor

• tempe wireless temperature sensor

For information about compatibility and purchasing additional

sensors, go to http://buy.garmin.com.

Pairing Your ANT+ Sensors

Before you can pair, you must put on the heart rate monitor or

install the sensor.

Pairing is the connecting of ANT+ wireless sensors, for

example, connecting a heart rate monitor with your Garmin

device.

Bring the device with range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

Select the Orange key.

Select Setup > ANT Sensor.

Select your sensor.

Select New Search.

When the sensor is paired with your device, the sensor

status changes from Searching to Connected. Sensor data

appears in the data page loop or a custom data field.

tempe

The tempe is a wireless temperature sensor. You can attach the

sensor to a secure strap or loop where it is exposed to ambient

air, and therefore, provides a consistent source of accurate

temperature data. You must pair the tempe with your device

(page

7) to display temperature data from the tempe.

Putting On the Heart Rate Monitor

NOTE: If you do not have a heart rate monitor, you can skip this

task.

to view a different day.

(page