Garmin VENU SQ MUSIC Manual del usuario - Página 24
Navegue en línea o descargue pdf Manual del usuario para Ver Garmin VENU SQ MUSIC. Garmin VENU SQ MUSIC 47 páginas.
También para Garmin VENU SQ MUSIC: Manual de inicio rápido (24 páginas)
Imprimir página
2
Select
> Sensors > Foot Pod > Cal. Factor.
3
Adjust the calibration factor:
• Increase the calibration factor if your distance is too low.
• Decrease the calibration factor if your distance is too high.
Improving Foot Pod Calibration
Before you can calibrate your device, you must acquire GPS
signals and pair your device with the foot pod
Wireless Sensors, page
19).
The foot pod is self-calibrating, but you can improve the
accuracy of the speed and distance data with a few outdoor runs
using GPS.
1
Stand outside for 5 minutes with a clear view of the sky.
2
Start a running activity.
3
Run on a track without stopping for 10 minutes.
4
Stop your activity, and save it.
Based on the recorded data, the foot pod calibration value
changes, if necessary. You should not need to calibrate the
foot pod again unless your running style changes.
Using an Optional Bike Speed or Cadence
Sensor
You can use a compatible bike speed or cadence sensor to
send data to your device.
• Pair the sensor with your device
Sensors, page
19).
• Set your wheel size
(Calibrating Your Speed Sensor,
page
20).
• Go for a ride
(Going for a Ride, page
Calibrating Your Speed Sensor
Before you can calibrate your speed sensor, you must pair your
device with a compatible speed sensor
Sensors, page
19).
Manual calibration is optional and can improve accuracy.
1
Hold
.
2
Select
> Sensors > Speed/Cadence > Wheel Size.
3
Select an option:
• Select Auto to automatically calculate your wheel size and
calibrate your speed sensor.
• Select Manual, and enter your wheel size to manually
calibrate your speed sensor
Circumference, page
Club Sensors
Your Venu Sq Music device is compatible with Approach
golf club sensors. You can use paired club sensors to
automatically track your golf shots, including location, distance,
and club type. See the owner's manual for your club sensors for
more information.
Situational Awareness
Your Venu Sq device can be used with Varia smart bike lights
and rearview radar to improve situational awareness. See the
owner's manual for your Varia device for more information.
NOTE: You may need to update the Venu Sq software before
pairing Varia devices
(Updating the Software Using the Garmin
Connect App, page
20).
tempe
The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
to ambient air, and therefore, provides a consistent source of
20
(Pairing Your
(Pairing Your Wireless
11).
(Pairing Your Wireless
(Wheel Size and
24).
accurate temperature data. You must pair the tempe with your
device to display temperature data from the tempe.
Charging the Device
This device contains a lithium-ion battery. See the Important
Safety and Product Information guide in the product box for
product warnings and other important information.
To prevent corrosion, thoroughly clean and dry the contacts and
the surrounding area before charging or connecting to a
computer. Refer to the cleaning instructions in the appendix.
1
Plug the small end of the USB cable into the charging port on
your device.
2
Plug the large end of the USB cable into a USB charging
port.
3
Charge the device completely.
Product Updates
On your computer, install Garmin Express
/express). On your smartphone, install the Garmin Connect app.
This provides easy access to these services for Garmin devices:
• Software updates
• Course updates
• Data uploads to Garmin Connect
• Product registration
Updating the Software Using the Garmin Connect App
Before you can update your device software using the Garmin
®
CT10
Connect app, you must have a Garmin Connect account, and
you must pair the device with a compatible smartphone
Your Smartphone, page
Sync your device with the Garmin Connect app
Garmin Connect App, page
When new software is available, the Garmin Connect app
automatically sends the update to your device. The update is
applied when you are not actively using the device. When the
update is complete, your device restarts.
Updating the Software Using Garmin Express
Before you can update your device software, you must
download and install the Garmin Express application and add
your device
(Using Garmin Connect on Your Computer,
page
16).
1
Connect the device to your computer using the USB cable.
When new software is available, the Garmin Express
application sends it to your device.
Device Information
WARNING
NOTICE
1).
16).
(www.garmin.com
(Pairing
(Using the
Device Information