Aliyiqi HF-50 Manual de inicio rápido - Página 13

Navegue en línea o descargue pdf Manual de inicio rápido para Equipos de prueba Aliyiqi HF-50. Aliyiqi HF-50 15 páginas. Hf digital display push-pull force gauge

Imprimir página

C. Do not use the instrument beyond the MAX range. Otherwise, the sensor may be damaged or even an

accident may occur.

d. When the test value exceeds 100% of full scale, the buzzer will continue to sound. In this case, please quickly

release the added load or reduce the load. When the test value exceeds 120% of full scale, the instrument may

be damaged.

3. Solve the crash status: When the instrument crashes unexpectedly, use a small round rod with a hard object

to press the\"Reset\" button on the left side of the instrument to quickly reset and shut down.

4. Safety matters:

a. Please use the matching charger to charge, otherwise it will cause circuit failure and even fire.

b. Do not use a power supply other than the rated voltage of the charger, otherwise it may cause electric shock

or fire.

c. Do not pull out or insert the power supply with wet hands, otherwise it may cause electric shock.

d. Do not pull the power cord of the charger to pull out the plug, so as to avoid the electric cord being broken and

being subjected to electric shock.

e. Please clean the machine with a soft cloth. Immerse the cloth in water soaked with detergent and wring it out

to remove dust and dirt. Note: Do not use volatile chemicals to clean the machine (such as volatile agent,

thinner, alcohol, etc.).

f. Do not operate the machine in the following environment

①Humid environment

②Dusty environment

③ Where oil or chemicals are used

④ Places with earthquake sources around

g. Please use and store within the specified temperature and humidity range, otherwise it may cause malfunction

of the instrument.

h. Do not dismantle, repair or modify the machine by yourself, these actions may cause the instrument to

malfunction.

i. Other matters that need to be paid attention to in safety production.

J, HF series push-pull force meter confirmation items before repair

12. Data interface (9PIN)