Garmin GPSMAP 8600 series Manual de instrucciones de instalación - Página 5
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Sistema de navegación Garmin GPSMAP 8600 series. Garmin GPSMAP 8600 series 9 páginas.
También para Garmin GPSMAP 8600 series: Manual de instrucciones de instalación (9 páginas), Manual de inicio rápido (6 páginas)
Imprimir página
Item Description
GPSMAP 8400/8600 chartplotter
Display with an HDMI In port, such as a computer or television
GPSMAP HDMI cable (HDMI IN)
GPSMAP USB OTG adapter cable to power the HDMI source, if
possible (2.5 W maximum)
GPSMAP HDMI cable (HDMI OUT)
HDMI source, such as a Blu-Ray player or Chromecast device
Dry environment, protected from moisture
Composite Video Considerations
This chartplotter allows video input from composite video
sources using the port labeled CVBS IN. When connecting
composite video, you should observe these considerations.
• The CVBS IN port uses a BNC connector. You can use a
BNC to RCA adapter to connect a composite-video source
with RCA connectors to the CVBS IN port.
• Video is shared across the Garmin Marine Network, but it is
not shared across the NMEA 2000 network.
Touchscreen Controls for a Connected Computer
To prevent corrosion due to moisture, you must use Garmin
GPSMAP accessory cables when connecting the chartplotter to
the computer. Using different cables voids your warranty.
You can connect the chartplotter to a computer to see the
computer screen and to control the computer using the
chartplotter touchscreen. To see the computer screen, you must
connect the computer to the HDMI IN port. To control the
computer using the chartplotter touchscreen, you must connect
the computer to the USB port.
The Garmin GPSMAP HDMI accessory cable is 4.5 m (15 ft)
long. If you need a longer cable, you should use an active HDMI
cable only. You need an HDMI coupler to connect the two HDMI
cables. You must make all cable connections in a dry
environment.
The Garmin GPSMAP USB accessory cable is 4.5 m (15 ft)
long. If you need a longer cable, you should use a USB hub or
USB repeater extension cable only. You should make all cable
connections in a dry environment.
NOTICE
Item
Description
Garmin chartplotter
Computer
GPSMAP USB cable
Dry environment, protected from moisture
GPSMAP HDMI cable (HDMI IN)
NMEA
®
0183 with Audio Cable Pinout
The optional NMEA 0183 with audio cable (010-12852-00)
includes bare wires and an RCA connector for an audio out
connection to a stereo, including FUSION
can be purchased from
garmin.com
After installing, you can connect the RCA connector to the AUX
input of the stereo. The HDMI input is output to the stereo.
The NMEA 0183 with audio cable provides one differential
NMEA 0183 input and output port.
Pin
Wire Function
1
NMEA 0183 Rx/A (In +)
2
NMEA 0183 Rx/B (In -)
3
NMEA 0183 Tx/B (Out -)
4
NMEA 0183 Tx/A (Out +)
5
Ground
6
Alarm
7
Accessory on
8
Ground (shield)
9
Audio Left Channel
10
Audio Common
11
Audio Right Channel
For more information on NMEA 0183 wiring with this cable, see
the cable instructions at
www.garmin.com/manuals/nmea0183
_audio_cable.
NMEA 0183 Connection Considerations
• The chartplotter provides one Tx (transmit) port and one Rx
(receive) port.
• Each port has 2 wires, labeled A and B according to the
NMEA 0183 convention. The corresponding A and B wires of
each internal port should be connected to the A (+) and B (-)
wires of the NMEA 0183 device.
• You can connect one NMEA 0183 device to the Rx port to
input data to this chartplotter, and you can connect up to
®
stereos. This cable
or your local Garmin dealer.
Wire Color
Orange/white
White
Pink
Gray
Black
Yellow
Orange
Brown
White
Blue/red
Red
5