Garmin NavComm SL30 Manual del usuario - Página 30

Navegue en línea o descargue pdf Manual del usuario para Sistema de navegación Garmin NavComm SL30. Garmin NavComm SL30 48 páginas. Vhf transceiver
También para Garmin NavComm SL30: Manual de consulta rápida (2 páginas), Instalación (2 páginas)

Imprimir página
Advanced Operation
3) The SL30's internal CDI will show "BC" and the
external CDI annunciator will show "BC."
4) Make sure you are flying a Back Course approach,
because the CDI is now reversed so you can still
"chase" the needle.
HSI
Do NOT select the reciprocal inbound course. The SL30
will automatically send the correct left/right deviations to
your connected HSI.
Autopilot
Do NOT select Back Course in your autopilot if it is
connected to the SL30. The SL30 will automatically send
the correct information to your connected autopilot.

To/From Radial

The VOR radial display shows the To/From radial
computed by the active channel's signal as well as the
Morse code channel identifier decoded from the received
audio. If no signal is received, the bearing will be dashed.
Until the identifier is decoded, "vor" will be displayed.
The
the VOR radial display is not currently shown, press
show the radial display. When the VOR radial is
displayed, pressing
and Radial From the VOR. This button is not functional
if a localizer frequency is selected on the active channel.
24
111.10 s116.00 loc
112.80 s117.40
112.80 s117.40
T/F
button selects the To or From radial display. If
T/F
bc +}}
vor
PDX
will toggle between the Bearing To
from ---
from 115
T/F
to