Garmin nuvi 200 Series Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de navegación Garmin nuvi 200 Series. Garmin nuvi 200 Series 28 páginas. Declaration of conformity
También para Garmin nuvi 200 Series: Manual del usuario (50 páginas), Manual de instalación (17 páginas), Información sobre seguridad y productos (32 páginas), Instrucciones y normas (8 páginas), Declaración de conformidad (1 páginas), Manual de instalación (17 páginas), Primeros pasos (16 páginas)

For horizontal bars: Separate and

remove the top part of the mount, turn it

90 degrees, and replace. Continue with

step 2.

2. Place the wedge on the bicycle stem,

and then place the bicycle mount on

the wedge. Make sure the release lever

is on the left.

3. Thread the two cable ties through the

two slots on the bicycle mount. Position

the mount on your bicycle and attach

using the cable ties.

Release

lever

Cable ties

To attach the cradle to the bicycle

mount:

1. Fit the bottom of the nüvi in the cradle,

and snap the top of the nüvi into place.

2. Align the cradle with the bicycle mount.

3. Slide the cradle left onto the bicycle

mount until it snaps into place.

tip: Change the Usage Mode on your

nüvi. Touch

usage Mode > Bicycle.

To release the cradle:

1. Remove the nüvi from the cradle.

2. Press down on the release lever, and

slide the cradle to the right.

> Settings > System >

EN-3