Garmin Oregon 300 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Sistema de navegación Garmin Oregon 300. Garmin Oregon 300 26 páginas. Oregon series
También para Garmin Oregon 300: Manual del usuario (48 páginas), Manual de consulta rápida (2 páginas), Manual de inicio rápido (8 páginas), (danés) Manual (48 páginas)

Imprimir página

1. Using and Installing an Sd Card

Installing the Batteries

The Colorado operates on two (2) AA batteries (not

included). You can use Alkaline, NiMH, or lithium

batteries.

To install the batteries:

1. Remove the battery cover by lifting the latch and

sliding it off the back

of the unit.

2. Insert the batteries,

observing the proper

polarity. A diagram

is molded into the

battery compartment.

3. Reinstall the battery

cover by sliding the

casing back on the

unit and fastening the

latch.

Remove the batteries when

you do not plan to use the

unit for several months.

Stored data is not lost when

batteries are removed.

Colorado Series Owner's Manual

Battery cover

Latch

Battery compartment

Turning On and Off the Colorado

To power on the Colorado:

•

Press and hold the Power key until the

Welcome page displays on the Colorado.

To power off the Colorado:

•

Press and hold the Power key.

First Time Turning On the Colorado

The first time you turn on your Colorado, the GPS

receiver must collect satellite data and establish its

current location. To ensure proper initialization, the

Colorado is shipped from the factory in AutoLocate

mode, which allows the receiver to "find itself"

anywhere in the world.

NOTE: To receive satellite signals, you must be

outdoors and have a clear view of the sky.

After powering on the first time, the Colorado moves

you through three setup screens: language selection,

time zone, and daylight savings time mode. For

complete information on initial Colorado setup, see the

Colorado Series Quick Start Guide.

ettinG

tarted