Garmin GNS 430 Refencia rápida - Página 4

Navegue en línea o descargue pdf Refencia rápida para Pantalla de aviónica Garmin GNS 430. Garmin GNS 430 17 páginas. Friendlypanels gps for microsoft fs9 & fsx
También para Garmin GNS 430: Manual del piloto (22 páginas), Manual de instrucciones (6 páginas), Apéndice del Manual del Piloto (27 páginas), Apéndice del Manual del Piloto (4 páginas), Referencia rápida (23 páginas), Apéndice del Manual del Piloto (22 páginas), Especificación (2 páginas), Manual de operaciones para pilotos (10 páginas), Manual de instrucciones (27 páginas)

Imprimir página
Garmin GNS 430 Refencia rápida
Screen Layout / CURSORs / Frequency Selection
Screen Layout (windows)
{
COM Window
{
VLOC Window
The GNS 430's display is divided into three separate "windows" (or
screen areas). The left 1/4 of the display provides a COM window (top two
lines) and a VLOC window (bottom two lines) The right 3/4 of the display
consists of a GPS window, which is where you'll find the various navigation,
waypoint information and settings "pages".
Each unique screen of information is referred to as a page. Pages are
typically selected using the small ( a ) and large (
cursor removed from the GPS window. See the following page for details
on arrangement of the GNS 430's main pages.
Cursors
There are two separate cursors: a tuning cursor and a GPS window
cursor. The tuning cursor is used to select the standby COM or VLOC
frequency. If desired, press the small left knob ( v ) to move the tuning
cursor to the VLOC window. Then, use the small ( f ) and large (
knobs to select the desired frequency. The COM (
4
flop keys are used to activate the selected frequency.
Active Frequency on top &
Standby on bottom
(highlighted by cursor)
}
GPS Window
d
) right knobs—with the
h
) left
W
V
) and VLOC (
) flip-

Frequency Selection

1. If the tuning cursor is not currently in
the desired window (COM or VLOC),
press the small left knob
momen-
( v )
tarily.
h
2. Rotate the large left knob (
) to
select the desired megahertz (MHz)
value. For example, the “117” portion
of the frequency “117.80”.
3. Rotate the small left knob
to
( f )
select the desired kilohertz (kHz)
value. For example, the “.80” portion
of the frequency “117.80”.
4. To activate the selected frequency,
press the corresponding flip-flop
W
key—
for COM frequencies or
for VLOC frequencies.

Data Entry

Data is entered in the GPS win-
d
dow using the large (
) and small
( a ) right knobs. The large right
d
knob (
) is used to move the cursor
about the page. The small right
knob ( a ) is used to select individual
characters for the highlighted cursor
location (see illustration).
V