Garmin GPS 400 Apéndice del Manual del Piloto - Página 11
Navegue en línea o descargue pdf Apéndice del Manual del Piloto para Pantalla de aviónica Garmin GPS 400. Garmin GPS 400 22 páginas. 400/500 series gts 8xx interface
También para Garmin GPS 400: Manual de instrucciones (6 páginas), Apéndice del Manual del Piloto (27 páginas), Apéndice del Manual del Piloto (4 páginas), Referencia rápida (17 páginas), Referencia rápida (23 páginas)
Imprimir página
1.6
USeR-INITIATeD TeST
In addition to the power-up test, the GTS 8XX performs self-tests during normal
operation. A self-test is performed once per minute to verify that the antenna is
connected. Also, a calibration is performed at varying intervals based on time and
temperature. A user-initiated test of the GTS 8XX interface can also be performed.
The test criteria are identical to the power up self-test, although the user-initiated test
is concluded by an aural pass/fail message.
NOTE: A user-initiated test can only be performed when in standby or failed
mode.
Performing a user-initiated test:
1)
Turn the small right knob to select the Traffic Page.
2)
From the Traffic Page, press the MENU Key to display the Page Menu.
3)
Turn the small right knob to select 'Self Test?'.
4)
Press the ENT Key, 'TEST' is displayed.
190-00140-78 Rev. A
Figure 2 Standby Mode
Figure 3 Self-Test Mode
400/500 Pilot's Guide Addendum for GTS 8XX Interface
GTS 8XX Interface
Test-Mode
Indication
5