Garmin GHP 10 Marine Autopilot System Manual de instrucciones de instalación - Página 15

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Sistema GPS marino Garmin GHP 10 Marine Autopilot System. Garmin GHP 10 Marine Autopilot System 48 páginas. Tachometer reference
También para Garmin GHP 10 Marine Autopilot System: Manual de inicio rápido (21 páginas), Manual de instrucciones de instalación (26 páginas), Referencia técnica (42 páginas), Declaración de conformidad (1 páginas), Referencia (1 páginas)

Alternative Compact 2.1 L Pump Hydraulic Configurations

Depending on the hydraulic layout of your boat, alternative hydraulic installations using the compact 2.1L pump are possible:

•

The C1 and H1 ports are directly connected to each other internally, and the C2 port is directly connected to H2. Because these

ports are connected internally, you can leave the plugs in the C ports and use tee fittings to connect both the helm and cylinder

hoses to the H ports. Though you should use all four ports for an ideal installation, this type of installation will steer the boat

correctly.

•

If you plan to use this alternative compact 2.1L pump installation on a larger boat with long spans of hydraulic hose, the fitting

size you choose is important. The fittings on the C ports are SAE #6, while the fittings on the H ports are SAE #4. Therefore, for

alternative installations on larger boats, it is best to move the plugs from the C ports to the H ports and use tee fittings to connect

both the helm and cylinder hoses to the larger C ports as illustrated below.

GHP 10 Marine Autopilot System Installation Instructions

Alternative Hydraulic Installation using the C (SAE #6) Ports

H ports

C ports

Compact .1 L

pump

(and motor)