DEFAULT NAV PAGE / ANNUNCIATORS
Default NAV Page
Active Leg of
Flight Plan, or
Direct-to Destination
The following symbols are used (directly above the
CDI) to depict the active leg of a flight plan or direct-to:
Course to a Waypoint, or Desired Course between Two Waypoints
Direct-To a Waypoint
Left-hand Holding Pattern
Right-hand Holding Pattern
DME Arc to the left
To Quickly Display the Default NAV Page
From any page, press and hold CLR for approxi-
1.
mately two seconds.
Bottom Row Annunciators and Messages
Terrain annunciations:
Ter Test, Ter N/A, Terrain, Ter INHB,
and TER Fail
CDI/RAIM Mode: Approach (LNAV,
L/VNAV, LNAV+V, or LPV ), Oce-
anic (OCN), Terminal (TERM), En
Route (ENR) or "0.30" (if the CDI is
manually set to "0.30" and not fly-
ing an approach). Annunciations not
applicable to the external CDI when
VLOC is active.
GPS Integrity Failure
User-selectable
Data Fields
(all four corners)
To/From
Flag
Course Deviation
Indicator (CDI)
Vectors-To-Final
Left Procedure Turn
Right Procedure Turn
DME Arc to the right
Navigation Source:
GPS, VLOC, or GPS-PTK
190-00357-01 Rev H
To Select a Different Data Item for any Data Field
1.
With the Default NAV Page displayed, press the
MENU key to display an options menu.
Turn the large right knob to highlight the "Change
2.
Fields?" option, and press ENT to select this
option.
Use the large right knob to highlight the data
3.
field you wish to change.
Turn the small right knob to display a list of avail-
4.
able data items. Continue turning the small right
knob to select the desired data item from the list.
5.
Press ENT to select the desired data item and return
to the Default NAV Page.
6.
Press the small right knob to remove the cursor
from the page.
Message Annunciator: Flashing (new mes-
sage), On, or blank (no message)
Page Annunciator (NAV/WPT/AUX/
OBS Mode: Suspend
NRST/FPL/VNAV/PROC), Waypoint
(SUSP), OBS or blank (for
Alert ("Next DTK"), Turn Advisory
auto-sequencing)
("Left to xxxº"), etc.
9
Imprimir página