Garmin GPSMAP 500 Series Manual del piloto - Página 24

Navegue en línea o descargue pdf Manual del piloto para Sistema GPS marino Garmin GPSMAP 500 Series. Garmin GPSMAP 500 Series 28 páginas. Flat-mount kit
También para Garmin GPSMAP 500 Series: Manual de instrucciones (6 páginas), Apéndice del Manual del Piloto (27 páginas), Manual de consulta rápida (2 páginas), Manual de referencia (2 páginas), Manual de instrucciones (28 páginas), Plantilla (2 páginas), Plantilla (1 páginas), Manual de configuración (2 páginas), Manual de inicio rápido (4 páginas), Manual del usuario (38 páginas), Manual del usuario (44 páginas), Manual de instrucciones de instalación (34 páginas), Manual de consulta rápida (2 páginas)

Imprimir página
Garmin GPSMAP 500 Series Manual del piloto
SECTION 4
RYAN TCAD INTERFACE

TCAD Setup Page

The Ryan TCAD Setup Page is accessed from the Traffic
Page. The TCAD Setup Page allows traffic data to be
configured. The definitions of the available options are
listed in the TCAD Pilot' s Handbook.
Changing a TCAD setup option:
Turn the small right knob to select the Traffic
1)
Page.
2)
Press the MENU Key to display the Page
Menu.
Turn the small right knob to select 'Setup?'.
3)
4)
Press the ENT Key. The flashing cursor
highlights the Mode field (Figure 4-5).
Figure 4-5 Ryan TCAD Setup Page
5)
Turn the small right knob to select the desired
mode. The mode selection determines which
shield definition to display and change.
Press the ENT Key.
6)
7)
Select the desired remaining options fields
by turning the large right knob, then turn
the small right knob to select the desired
option, and press the ENT Key to confirm the
selection.
8)
Return to the Traffic Page by pressing the CLR
Key.
4-4
Traffic Page Fields
There are two selectable fields on the Traffic Page:
the Operating Mode Field and the Barometric Pressure
Field. The Operating Mode Field selects the TCAD
operating mode (Table 4-2). Please, refer to the TCAD
Pilot' s Handbook for a complete description of all modes
of operation. For the 9900BX model, this field is replaced
with the SKYWATCH style altitude mode.
NOTE: The modes APR (approach) and DEP
(departure), are displayed when in either of those
modes, but are not manually selectable.
400/500 Series Display Interfaces
TCAD 9900B Operating Modes
GND
Ground Mode
TML
Terminal Mode
STD
Standard Mode
ENR
Enroute Mode
UNR
Unrestricted Mode
Table 4-2
190-00140-10 Rev. E