Garmin GPSMAP 5208 - Marine GPS Receiver Manual de instrucciones de instalación - Página 15

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Sistema GPS marino Garmin GPSMAP 5208 - Marine GPS Receiver. Garmin GPSMAP 5208 - Marine GPS Receiver 25 páginas. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
También para Garmin GPSMAP 5208 - Marine GPS Receiver: Información de seguridad importante (4 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (2 páginas), Manual del usuario (2 páginas), Referencia técnica (30 páginas), Manual de instrucciones de instalación (19 páginas), Manual de instrucciones de instalación (25 páginas), Manual de consulta rápida (2 páginas), Declaración de conformidad (1 páginas), Manual de impresión (2 páginas), Manual complementario (24 páginas), Manual del usuario (6 páginas)

Imprimir página
Garmin GPSMAP 5208 - Marine GPS Receiver Manual de instrucciones de instalación

Wiring Additional nMEA 0183 Devices

The NMEA 0183 data cable included with the GPSMAP 4000/5000 series chartplotter supports the NMEA 0183 standard, which is used to wire
various NMEA 0183-compliant devices, such as VHF radios, NMEA instruments, autopilots, or a computer.

Basic nMEA 0183 Wiring

These diagrams illustrate basic NMEA 0183 wiring used to connect your GPSMAP 4000/5000 series chartplotter to NMEA 0183-compliant
devices such as an AIS or DSC device. For more-complete information on the NMEA 0183 capabilities of the GPSMAP 4000/5000 series
chartplotter, see the section on advanced NMEA 0183 wiring
Garmin
GPSMAP 4000/5000 series
chartplotter
Garmin
GPSMAP 4000/5000 series
chartplotter
notes:
• If the NMEA 0183-compliant device has only one receiving wire (no A, B, +, or -), leave the pink wire unconnected.
• If the NMEA 0183-compliant device has only one transmitting wire (no A, B, +, or -), connect the orange/white wire to ground.
• Consult the installation instructions of your NMEA 0183-compliant device to identify the Transmit A(+) and B(-) wires and Receive A(+)
and B(-) wires.
• Use 28 AWG, shielded, twisted-pair wiring for extended runs of wire.
• Solder all connections and seal them with heat-shrink tubing.
GPSMAP 4000/5000 Series Installation Instructions
(page
16).
WIrE CoLor
FuSE
7.5 A - 42 V
rED (PoWEr)
PoWEr
BLACk (PWr GnD)
CABLE
BLACk (DAtA GnD)
>
nMEA 0183
CABLE
orAnGE/WHItE
>
>
>
Wiring to a nMEA 0183-compliant Device (AIS)
WIrE CoLor
FuSE
7.5 A - 42 V
rED (PoWEr)
PoWEr
BLACk (PWr GnD)
CABLE
BLACk (DAtA GnD)
orAnGE/WHItE
>
nMEA 0183
WHItE
CABLE
>
>
>
Wiring to a Single-ended nMEA 0183-compliant Device
-
+
BAttErY
10–35 Vdc
BLACk (PWr GnD)
BLACk (DAtA GnD)
WHItE
trAnSMIt A(+)
trAnSMIt B(-)
GrAY
PInk
-
+
BAttErY
10–35 Vdc
BLACk (PWr GnD)
BLACk (DAtA GnD)
GrAY
PInk
unConnECtED
WIrE
rED (PoWEr)
NMEA 0183-compliant
>
>
rECEIVE A(+)
>
rECEIVE B(-)
>
WIrE
rED (PoWEr)
NMEA 0183-compliant
trAnSMIt
>
rECEIVE
>
device
(AIS)
device
15