AEG PRO COMBI BS731470N Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Horno AEG PRO COMBI BS731470N. AEG PRO COMBI BS731470N 48 páginas.

AEG PRO COMBI BS731470N Manual del usuario
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1. Take the four colour change strip
supplied with the steam set in the
oven.
2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water!
3. Shake the strip to remove the excess
of the water.
4. After 1 minute check the hardness of
the water according to the table
below.
The colours of the reaction zones
continue to change after 1 minute.
Do not consider this in the
measurement.
5. Set the hardness of the water in the
settings menu. Refer to the "Using
the settings menu".

6. DAILY USE

WARNING!
Refer to Safety chapters.
6.1 Operating the appliance
To operate the appliance you can use:
• the manual mode
• automatic programmes
6.2 Oven functions
The lamp may automatically
deactivate at a temperature
below 60 °C during some
oven functions.
6.3 Setting the oven function
1. Activate the appliance with
The display shows the set temperature,
the symbol and the number of the oven
function.
2. Touch
function.
3. Touch
automatically after five seconds.
or
to set an oven
or the appliance starts
Test strip
The black squares in the table
correspond to red squares on the test
strip.
You can change the hardness level of the
water in the menu settings menu.
After a power cut you do not have to set
the hardness level of the water again.
If you activate the appliance
and do not set an oven
function or programme, the
appliance deactivates
automatically after 20
seconds.
6.4 Changing the temperature
Touch
temperature in steps of 5 °C.
When the appliance is at the set
temperature, an acoustic signal sounds
three times and the Heat up indicator
goes out.
6.5 Checking the temperature
You can see the temperature in the
or
.
appliance when the function or
programme operates.
1. Touch
The Temperature / Time display shows
the temperature in the appliance.
2. Touch
temperature or the display shows it
automatically after five seconds.
ENGLISH
Hardness of the
water
1
2
3
4
or
to change the
.
to go back to the set
11