alkitronic RCL Series Manual de funcionamiento y mantenimiento - Página 5

Navegue en línea o descargue pdf Manual de funcionamiento y mantenimiento para Herramientas alkitronic RCL Series. alkitronic RCL Series 12 páginas. Compact torque multiplier
También para alkitronic RCL Series: Manual de funcionamiento y mantenimiento (12 páginas)

Imprimir página

Safety instructions

1.1

Obligations of the operator

The user is obliged to read these operating and maintenance

instructions before carrying out any operation or service.

alkitronic® CL operations may only be performed by persons

who are familiar with the purpose, consequences and exact

execution.

The user must not be impaired in any way, such as through

drugs, alcohol and medication.

1.2

Intended use

alkitronic® CL are suitable for continuously rotating tightening

and loosening of heavy screw connections. Any other use,

e.g. as a stirring or drilling machine, can cause damage to the

device and the operator. The torque multipliers must not be

subjected to external mechanical forces that could lead to

deformation. Other types of use not listed here require the

approval of alki TECHNIK GmbH.

If you have questions about safety measures and areas of ap-

plication, your alkitronic® Partner will be happy to help you.

Incorrect operation, improper use, operation by

unqualified personnel can cause serious personal

injury and property damage.

The user is responsible to third parties in the work

area.

Operation

Depending on the work environment and field of applica-

tion for the alkitronic® CL multiplier, local regulations for the

wearing of body protection (eg safety shoes, helmet, etc.)

may apply.

Failure to comply with such regulations can result

in serious bodily injury (e.g. crushing, head inju-

ries from flying metal parts). When operating the

alkitronic® CL wearing of hearing protection is

mandatory. In continuous operation, the handle

housing cools down greatly. Wearing gloves is

therefore recommended.

2.1

Commissioning

Depending on the field of applciation, standard nuts / con-

nectors, special torque transducers or adapters are required

for tightening and loosening screw connections (available as

accessories). The standard nuts / connectors are attached to

the output square and secured. Exchange see also Service,

section 3.1.

Before the compressed air is connected, the multiplier must

be prepared for the process:

Pneumatic Torque Multiplier

•

Conducting a security check for correct fit of the adapter

Check for possible damages of the DMAs or adapter

In case of damage, replace immediately - do not continue

working. Only use original alkitronic® accessories or spare

parts!

2.2

Preparing for use

alkitronic® DMA

Torque reaction absorber

• Place the alkitronic® CL multiplier on a flat surface

• Put support foot / DMA (1) on the gearing (4)

• Fix the standard nut / connector (2) / (3) to the square

shaft (5)

• Insert locking pin (7), secure with rubber ring (6)

or screw in the locking screw (8)

alkitronic®

STACO

Standard

nut

alkitronic® STACO

Standard nut

alkitronic® STABI

Standard connector