Garmin Fusion Apollo MS-ERX400 Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Equipamiento marino Garmin Fusion Apollo MS-ERX400. Garmin Fusion Apollo MS-ERX400 20 páginas.
También para Garmin Fusion Apollo MS-ERX400: Manual de instrucciones de instalación (8 páginas)
Imprimir página
Registering Your Fusion Device
Help us better support you by completing our online registration today.
• Go to garmin.com/account/register/.
• Keep the original sales receipt, or a photocopy, in a safe place.
Cleaning the Device
1 Dampen a soft, clean, lint-free cloth with fresh water.
2 Gently wipe the device.
Software Updates
You must update the software for this device using a connected compatible stereo or using the Fusion-Link
app.
For best results, you should update the software in all Fusion devices regularly.
Updating the Remote Control Software Using a USB Flash Drive
You can update the remote control software using a USB flash drive through a compatible stereo on the
network.
Do not turn off the device or disconnect the power during a software update. Turning off the power during a
software update may cause the device to become unresponsive.
NOTE:
• You cannot update the software using a USB flash drive formatted using the NTFS file system. If you
encounter problems updating the device, format the USB flash drive using FAT32 and try the update process
again.
• The device may restart a few times when updating. This is normal.
• You can program only newer versions of software on the device.
1 Go to the software page for your device on support.garmin.com, and download the update file.
2 Extract contents of the .zip file to the root of your USB storage device.
The contents of the software update are contained in a folder named Garmin.
3 Insert the USB storage device in the USB port of a compatible Fusion PartyBus stereo on the network.
4 On the ERX400, select
5 Select the name of the remote control.
6 Select UPDATE > ERX REMOTE.
TIP: If the stereo with the USB storage device has a screen, you can also start the remote control update
process form the UPDATE settings menu of the stereo.
The stereo transfers the update file to the remote control over the network, the remote control updates the
software, and then restarts.
10
More Information
NOTICE
> SETTINGS.
™
More Information