Garmin FUSION APOLLO MS-WB675 Manual - Página 41

Navegue en línea o descargue pdf Manual para Equipamiento marino Garmin FUSION APOLLO MS-WB675. Garmin FUSION APOLLO MS-WB675 46 páginas. Marine entertainment system
También para Garmin FUSION APOLLO MS-WB675: Manual de instrucciones de instalación (19 páginas)

Imprimir página

Network Troubleshooting

If you cannot see or connect to Fusion PartyBus devices on the network, perform these steps.

• Verify that all Fusion PartyBus devices, network switches, routers, and wireless access points are connected

to the network and turned on.

• Verify that wireless Fusion PartyBus devices are connected to a wireless router or wireless access point on

the network.

NOTE: Wired connections are more reliable than wireless connections. If possible, you should connect

devices to the network using an Ethernet cable.

• Verify that only one device, either a stereo or a router, is configured as a DHCP server.

• Change the channel on your router or wireless access point to test for and correct interference.

You may experience wireless interference if there are many nearby wireless access points.

• Disconnect Bluetooth devices to test for and correct interference.

Connecting a Bluetooth device to a stereo configured as a wireless access point or client may reduce

wireless performance.

• If you are experiencing trouble connecting, make sure your router supports 2.4 GHz band connections.

When connecting to a wireless router, this device is compatible with only 2.4 GHz band connections, and

cannot connect to a 5 GHz band.

• If you configured static IP addresses, verify that every device has a unique IP address, that the first three sets

of numbers in the IP addresses match, and that the subnet masks on every device are identical.

• If you have made configuration changes that might be causing networking issues, reset all network settings

to the factory default values.

Network Status Icons

A network-status icon is shown on some screens of the device. You can refer to this table to understand the

appearance of the icon and help diagnose issues with the Fusion PartyBus network.

You can also observe the network status LED on the stereo for further information when troubleshooting

Buttons and Status LEDs,

The device is connected correctly to a network.

The device cannot detect the network. An Ethernet cable may not be connected or there may be other

problems with the network.

The stereo keeps locking up when connected to an Apple device

• Press and hold the power button to reset the stereo.

• Reset the Apple device. Go to

• Make sure you have the latest version of iTunes

The stereo is not finding my connected Apple device

• Make sure your Apple device supports Interface Accessory Protocol 2 (iAP2). This stereo is not compatible

with iAP1 devices.

• Make sure you have the latest version of iTunes and the latest operating software on your Apple device.

• Make sure you have the latest version of the Fusion-Link application on your Apple device.

• Reset the Apple device.

Go to

www.apple.com

• Contact your Fusion dealer or go to support.garmin.com.

Appendix

page 1).

www.apple.com

for more information.

and the latest operating software on your Apple device.

(Stereo