Garmin Fusion BB100 Instrucciones de instalación - Página 2
Navegue en línea o descargue pdf Instrucciones de instalación para Equipamiento marino Garmin Fusion BB100. Garmin Fusion BB100 4 páginas. Black box entertainment system with wired remote control
También para Garmin Fusion BB100: Manual de instrucciones de instalación (12 páginas)
Imprimir página
6
Secure the remote control to the mounting surface using the
mounting nut.
7
Route the cable away from sources of interference.
8
Connect the cable to the port on the BB100 black box.
Connection Considerations
The stereo must be connected to power, to speakers, and to
media input sources to function correctly. You should carefully
plan the layout of the stereo, wired remote, speakers, optional
NMEA 2000
®
network, and your input sources before making
any connections.
Port Identification
Port
Connects to
ANT
External AM/FM antenna
ACC
For future use
NMEA
NMEA 2000 network
USB
USB-compatible media device
15 A fuse
Power and speakers
Subwoofer, zone 1, and auxiliary device
Remote control
Wiring Harness Wire and Connector Identification
Wire Function
Wire
Color/
Number
Power (+)
Yellow
Ground (-)
Black
Amplifier on
Blue
2
Notes
Connects to the positive terminal of a
12 Vdc power source capable of
supplying 15 A.
Connects to the negative terminal of a
12 Vdc power source capable of
supplying 15 A. This wire should be
connected before connecting the
yellow wire. All accessories connected
to the stereo must share a common
ground location.
Connects to an optional external
amplifier to turn it on when the stereo
turns on.
Wire Function
Wire
Color/
Number
Mute
Brown
Dim
Orange
Speaker zone 1
White
left (+)
Speaker zone 1
White/black
left (-)
Speaker zone 1
Gray
right (+)
Speaker zone 1
Gray/black
right (-)
Speaker zone 2
Green
left (+)
Speaker zone 2
Green/
left (-)
black
Speaker zone 2
Purple
right (+)
Speaker zone 2
Purple/
right (-)
black
Auxiliary in left
Auxiliary in right
Zone 1 line out
(left)
Zone 1 line out
(right)
Subwoofer out
Connecting to Power
When connecting the stereo to power, you should connect it
through the ignition or another manual switch.
If it is necessary to extend the power and ground wires, use
2
14 AWG (2.08 mm
) wire. For extensions longer than 1 m (3 ft.),
2
use 12 AWG (3.31 mm
) wire.
1
Route the power wire
switch
, and route the black ground wire
2
If necessary, route a wire
battery .
3
Route the wiring-harness plug to the stereo.
Notes
Activates when connected to ground.
For example, when connected to a
compatible hands-free mobile phone,
the audio mutes or the input switches
to AUX IN when a call is received and
the phone connects this wire to
ground. This functionality can be
configured from the settings menu.
Connects to the boat's illumination wire
to dim the stereo screen when the
lights are on.
The gauge of the illumination wire must
be suitable for the fuse supplying the
circuit it is connected to.
Provides a red and white RCA stereo
line input for audio sources, such as a
CD or MP3 player.
Provides a full-range output to an
external amplifier, and is associated
with the volume control for zone 1.
Each cable provides a single mono
output to a powered subwoofer or
subwoofer amplifier, and one or both
cables can be used, depending on the
connection requirements of the
subwoofer or amplifier.
A connected subwoofer is associated
with the volume control for zone 1.
to the ignition or another manual
to the battery.
between the switch and the
BB100 Installation Instructions