Garmin GHP 10V Manual de instrucciones de instalación - Página 10
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Equipamiento marino Garmin GHP 10V. Garmin GHP 10V 48 páginas. Marine autopilot system
También para Garmin GHP 10V: Manual del usuario (28 páginas), Manual de instrucciones de instalación (20 páginas), Manual de instrucciones de instalación (20 páginas)
2.0 L or 1.2 L Pump Hydraulic Layout on Dual-Helm Boats
S
notes:
•
2.0 L/1.2 L pump (and motor):
◦
An unbalanced cylinder requires an unbalanced valve on the pump
◦
Mount the pump horizontally if possible. Do not mount the pump vertically with the pump end (hydraulic connections) down.
•
Shadow Drive:
◦
Mount the Shadow Drive horizontally and as level as possible.
◦
Install the Shadow Drive in either the port or the starboard hydraulic steering line.
◦
Always install a length of hose between the helm and the Shadow Drive.
◦
Install the Shadow Drive between the pump and both helms.
Do not install the Shadow Drive directly to the helm.
◦
◦
Do not install the Shadow Drive between the pump and the cylinder.
◦
Do not install the Shadow Drive between the two helms.
Do not turn the system on until you bleed all the air from the helm, the Shadow Drive, the pump, and all the hydraulic lines.
See
page
34.
10
S
R
P
Upper helm
Shadow Drive
.0 L/1. L pump
(and motor)
R
P
Lower helm
Port fitting
(page
Notice
Starboard line
Return line
Port line
Starboard fitting
Balanced cylinder
21).
GHP 10 Marine Autopilot System Installation Instructions