AEG F87782M0P Manual - Página 9

Navegue en línea o descargue pdf Manual para Lavavajillas AEG F87782M0P. AEG F87782M0P 28 páginas.

Imprimir página

Programme

1) The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the values.

5.2 Information for test

institutes

For all the necessary information for test

performance, send an email to:

6. SETTINGS

6.1 Programme selection

mode and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings

can be changed:

• The activation or the deactivation of

the acoustic signal for end of

programme.

• The selection of the colour for

TimeBeam.

• The activation or deactivation of the

rinse aid dispenser.

• The level of rinse aid according to the

required dosage.

These settings will be saved until you

change them again.

Water

(l)

13.5 - 14.5

13 - 13.5

9.0

4.0

9.0 - 10.5

Energy

(kWh)

1.4 - 1.6

0.7 - 0.9

0.8

0.1

1.0 - 1.2

[email protected]

Write down the product number (PNC)

that is on the rating plate.

How to set the programme

selection mode

The appliance is in programme selection

mode when the display shows the

programme number P1.

When you activate the appliance, usually

it is in programme selection mode.

However, if this does not happen, you

can set the programme selection mode

in the following way:

Press and hold simultaneously

until the appliance is in programme

selection mode.

6.2 The rinse aid dispenser

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

ENGLISH

Duration

(min)

150 - 164

60 - 70

210 - 220

and