Garmin GPSMAP 521s GPSMAP 521 Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento marino Garmin GPSMAP 521s GPSMAP 521. Garmin GPSMAP 521s GPSMAP 521 28 páginas. Flush mount template
También para Garmin GPSMAP 521s GPSMAP 521: Manual de instrucciones de instalación (12 páginas), Manual de referencia (2 páginas), Referencia técnica (42 páginas), Información de seguridad importante (48 páginas), Plantilla (2 páginas)

3. Install the unit in the opening (see Figure 2):

•

Place the unit housing in the recently cut hole in the mounting surface.

•

Slide the tension mount brackets onto the hex bolts and secure them with the four wing nuts.

•

Tighten the four wing nuts to secure the unit housing to the mounting surface. Be careful not to overtighten.

•

If you did not do so in step 2, connect the wiring harness to the unit, then slide the unit into the unit housing until it snaps in place.

Assembled unit and

flush mount hardware

NOTE: You must connect the wiring harness to the boat's power supply, GPS antenna, XM antenna (if applicable), and transducer (if applicable)

per the installation instructions included with the unit.

Tension mount brackets

Figure 2

Wing nuts