GPSMAP
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging your boat.
The GPSMAP 6000/7000 series chartplotter and GPS 17x antenna must be properly installed according to the following instructions. You need
the appropriate fasteners, tools, and mounts listed in each section. These items are available at most marine dealers.
Contact Garmin
Product Support if you have any questions while installing your GPSMAP 6000/7000 series chartplotter. In the USA, go to
®
www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020. In the UK, contact Garmin (Europe) Ltd. by
phone at 0808 2380000. In Europe, go to
Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.
Before installing your GPSMAP 6000/7000 series chartplotter, confirm that the package contains the items listed on the box. If any parts are
missing, contact your Garmin dealer immediately.
Product Registration
Help us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original sales receipt, or a
photocopy, in a safe place.
For future reference, write the serial numbers assigned to your GPSMAP 6000/7000 series chartplotter and GPS 17x in the space provided. The
serial numbers are located on a sticker on the back of each device.
Chartplotter serial number:
GPS 17x serial number:
to install the GPSMAP 6000/7000 series chartplotter, you must:
1. Mount the GPSMAP 6000/7000 series chartplotter (page 2).
2. Mount the GPS antenna (page 4).
3. Connect the GPSMAP 6000/7000 series chartplotter to power (page 7).
4. Connect the GPSMAP 6000/7000 series chartplotter and the GPS 17x antenna to an existing NMEA 2000 network or create a simple NMEA
2000 network (page 8).
5. Ensure that the chartplotter software is up-to-date (page 17).
the following additional installation options are not necessary in order to use the GPSMAP 6000/7000 chartplotter. they have
been included for your convenience:
• Connecting the chartplotter to other Garmin Marine Network compatible devices, such as a sounder or a radar (page 9).
• Connecting the chartplotter to a GPS 17 or GPS 17 HVS antenna (page 15).
• Connecting the chartplotter to other NMEA 0183-compatible devices such as a VHF radio with DSC (page 12).
• Connecting the chartplotter to an external alarm (page 15).
• Connecting the chartplotter to a video input source, to a PC, or to an external video monitor (page 16).
September 2010
6000/7000 Series Installation Instructions
®
WARNING
CAutIoN
Notice
www.garmin.com/support
and click
Part Number 190-01120-02 Rev. D
Contact Support
for in-country support information, or contact
Printed in Taiwan
Imprimir página