Garmin GTX 345 Series Manual del piloto - Página 20

Navegue en línea o descargue pdf Manual del piloto para Radio marítima Garmin GTX 345 Series. Garmin GTX 345 Series 36 páginas. All-in-one ads-b transponder

Imprimir página

3.4 System (SYS)

BACKLIGHT – This page displays the current backlight level and backlight level

offset. The backlight level offset is via the CRSR and

CONTRAST – This page displays the current contrast level and contrast level

offset. The contrast level offset is via the CRSR and

NOTE

Messages are not high priority. Their purpose is to provide additional

information on abnormal system behavior. They do not require immediate pilot

action. Any transponder failure will immediately display an alert with no pilot

action necessary to view the alert. For troubleshooting failure messages, refer

to section 7.

MESSAGES – This page displays the number of active system messages.

Viewing active system messages is via the CRSR key selection.

BLUETOOTH (GTX 345) – This page displays the status of the GTX 345

Bluetooth function. This page will not display when the GTX 345 connects to

a GX000 or GTN over HSDB. The Bluetooth function is automatically placed

into pairing mode when this page is displayed. Pairing must be initiated by

the PED and then confirmed on the GTX 345. The last 13 paired PEDs are

saved. At system power on, the GTX 345 automatically connects to any

available and previously saved paired PEDs. PEDs that are currently connected

and paired are viewed/deleted via the CRSR and 8 and 9keys. For

instructions on Bluetooth pairing refer to section 3.4.1. For information on

Connext Bluetooth features, refer to section 6.

GPS STATUS – This page displays the status of all configured GPS sources. The

GPS position fix details are viewed via CRSR key selection.

3-4

Press

FUN C

FU N C

key

Press

FU NC

FUN C

key

GTX 335/345 Pilot's Guide

 and

keys

 and

keys.

190-01499-00 Rev. C