Garmin Delta Smart Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Producto para el cuidado de mascotas Garmin Delta Smart. Garmin Delta Smart 12 páginas. On-collar training/obedience device and activity tracker for dogs

Garmin Delta Smart Manual del usuario

Status LED

The status LED on the dog collar device flashes red when a
stimulation takes place.
Syncing the Dog Collar Device with the
Garmin Canine App
Garmin
recommends you sync your device daily to review
®
updated data in the app and receive important notifications,
such as low battery alerts and software updates.
1
Bring your smartphone within 10 m (33 ft.) of the dog collar
device.
2
Open the Garmin Canine app.
The dog collar device periodically syncs data with the Garmin
Canine app automatically. The app indicates when the last
sync occurred.
3
View your current data in the Garmin Canine app.
Optional Keep Away Tag Sensor
You can use optional Keep Away Tag sensors to keep your dog
away from undesired locations, such as trash cans.
NOTE: If you do not have this sensor, you can skip this section.
Installing the Battery
1
Locate the circular battery cover
Away Tag sensor.
2
Twist the cover counter-clockwise until it is loose enough to
remove.
3
Remove the cover.
4
Place the battery into the cover with the positive side facing
the inside of the cover.
NOTE: Do not damage or lose the O-ring gasket.
5
Replace the cover by aligning the dots
clockwise.
When paired with a compatible dog collar device, the Garmin
Canine app indicates when less than 1 wk. battery life remains
for the sensor.
TIP: To replace the battery, you can use a piece of tape
magnet to remove the battery from the cover.
Pairing the Sensor with Your Device
Pairing is the process of connecting an ANT+
like the Keep Away Tag sensor, with a compatible dog collar
device. Your sensor and device must be paired directly through
the Garmin Canine app on your compatible smartphone.
1
Install the battery in the sensor.
The sensor turns on.
2
Go to www.garmin.com/apps, and download the Garmin
Canine app to your smartphone.
3
Open the Garmin Canine app on your smartphone.
Optional Keep Away Tag Sensor
on the back of the Keep
and rotating
or a
wireless sensor,
®
4
Follow the on-screen instructions to pair the sensor with your
device.
5
Bring your smartphone within 3 m (10 ft.) of the sensor and
the device.
NOTE: Stay 10 m (33 ft.) away from other sensors while
pairing.
6
Hold the sensor and dog collar device together.
When the sensor and device are paired, a message appears.
7
Follow the on-screen instructions to set the range.
8
Follow the on-screen instructions to select corrective actions.
Tips for Setting the Range
You can use the Garmin Canine app to set and test the effective
range of the sensor (up to 1 m). The sensor is designed to keep
your dog away from a small, general area.
NOTE: The effective range of the sensor may vary based on
environmental conditions. You should test the range to ensure
the device and sensor perform as expected.
• After the sensor is installed, approach the sensor from
multiple directions with the dog collar device to test the
range.
• Adjust the effective range.
• For best results, select the smallest range necessary to keep
your dog out of undesired areas.
NOTE: Corrections may be inconsistent if the range is set to
a distance greater than 1 m (3 ft.).
Installing the Sensor
You can use the included adhesive mount to install the sensor in
the location your dog should avoid. For example, a trash can.
You can install multiple sensors. Go to buy.garmin.com, or
contact your Garmin dealer for information about optional
accessories.
1
Attach one side of the adhesive mount to the center of the
battery door.
2
Attach the other side of the adhesive mount to the location.
Tips for Installing the Sensor
• For consistent performance, place the sensor in a location
with an unobstructed view in all directions.
• For best results, do not place the sensor on or inside metal
objects.
For example, to avoid a metal trash can, you can install the
sensor on the wall near the trash can.
• Do not put the sensor in water.
• Do not bury the sensor.
Device Information
Delta Smart Dog Collar Device Specifications
Battery type
Battery life
Operating temperature range
Charging temperature range
Storage temperature range
Water rating
*The device withstands pressure equivalent to a depth of 10 m.
For more information, go to www.garmin.com/waterrating.
Rechargeable lithium-ion
Up to 2 wk.
Up to 1 wk. with Keep Away Tag
From -20° to 60°C (from -4° to 140°F)
From 0° to 45°C (from 32° to 113°F)
From -20° to 85°C (from -4° to 185°F)
1 ATM*
3