LG 230/208V Manual de servicio - Página 12
Navegue en línea o descargue pdf Manual de servicio para Teléfono móvil LG 230/208V. LG 230/208V 35 páginas. Lg service manual room air conditioner
![LG 230/208V Manual de servicio](/uploads/products/server2/2337276/2337276.png)
2.2.3 SHROUD
1. Remove the fan. (Refer to section 2.2.2)
2. Remove the screw which fastens the shroud.
3. Remove the shroud. (See Fig. 8)
4. Re-install the component by referring to the
removal procedure, above.
2.3 ELECTRICAL PARTS
2.3.1 OUTDOOR MOTOR
1. Remove the clamp cord and disconnect a wire
housing in control box. (Refer to section 2.1.2)
2. Remove the fan. (Refer to section 2.2.2)
3. Remove the 2 screws which fasten the motor.
(See Fig. 9)
4. Remove the motor.
5. Re-install the components by referring to the
removal procedure, above.
2.3.2 INDOOR MOTOR
2.3.3 COMPRESSOR
1. Discharge the refrigerant system using Freon
Recovery System.
If there is no valve to attach the recovery system,
install one (such as a WATCO A-1) before venting
the Freon
TM
. Leave the valve in place after
servicing the system.
2. Disconnect the 3 leads from the compressor.
3. After purging the unit completely, unbraze the
suction and discharge tubes at the compressor
connections.
4. Remove the 3 nuts and the 3 washers which
fasten the compressor. (See Fig. 10)
5. Remove the compressor.
6. Re-instill the components by referring to the
removal procedure, above.
2.3.4 CAPACITOR
1. Remove the control box. (Refer to section 2.1.2)
2. Remove 1 screw and disconnect the leads which
connected to the box type capacitor.
(See Fig. 11)
3. Remove 1 screw and the clamp which fastens the
can-type capacitor. (See Fig. 11)
4. Disconnect all the leads of capacitor terminals.
5. Re-install the components by referring to the
removal procedure, above.
(Refer to section 2.2.1)
TM
Figure 8
Figure 9
Figure 10
Figure 11
—12—