AEG FAVORIT 65050 VI Instrucciones de uso - Página 11
Navegue en línea o descargue pdf Instrucciones de uso para Lavavajillas AEG FAVORIT 65050 VI. AEG FAVORIT 65050 VI 48 páginas. Aeg the dishwasher that can be fully integrated
También para AEG FAVORIT 65050 VI: Instrucciones de uso (48 páginas)
Imprimir página
1) The water hardness will only be indicated acoustically if the acoustic signal has
been activated.
2) (°d) German degree, measure of the hardness of water
3) [mmol/l] millimol per litre, international unit for the hardness of water
4) On this setting the length of the programme may be slightly longer.
*) Factory setting
Setting the water softener
Using the table as a guide, adjust the water softener to that which cor-
responds to the hardness of the water in your area:
0
The dishwasher must be switched off.
Setting manually:
1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
3. Turn the hardness range switch to 0
or 1 (see table).
4. Replace the lower basket.
Setting electronically:
5. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
If the only LED indicator illuminated is one that belongs to a pro-
3
gramme button, this means that this programme has been activated.
The programme must be cancelled (RESET):
Press function buttons 2 and 3 simultaneously for approx. 1 second.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
6. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators in function buttons 1 to 3 will flash.
7. Press function button 1.
The LED indicator for function button 1 will flash.
The multi-display will indicate the hardness setting.
The number of the acoustic signals heard (only when the acoustic sig-
nal has been activated) also corresponds to the hardness setting.
8. Pressing function button 1 increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
Operating Instructions
11