Fujitsu 9319205151-04 Manual de instalación - Página 11
Navegue en línea o descargue pdf Manual de instalación para Aire acondicionado Fujitsu 9319205151-04. Fujitsu 9319205151-04 11 páginas. Outdoor unit
Imprimir página5.7. Installing insulation
• Determine the thickness of the insulation material by referring to Table A.
Table A, Selection of insulation
(for using an insulation material with equal heat transmission rate or below
0.040 W/(m·k))
Relative humidity
[mm (in.)]
6.35 (1/4)
9.52 (3/8)
Pipe diameter
12.70 (1/2)
15.88 (5/8)
19.05 (3/4)
• If the ambient temperature and relative humidity exceed 32 °C, increase the level of
heat insulation for the refrigerant pipes.
6. TEST RUN
Always turn on the power 12 hours prior to the start of the operation in order to ensure
compressor protection.
Make a TEST RUN in accordance with the installation manual for the indoor unit.
7. INFORMATION
Main contents of label
Item
MODEL
Electric characteristics
COOLING
CAPACITY
CURRENT
INPUT POWER
ENERGY EFFICIENCY RATIO
HEATING
CAPACITY
CURRENT
INPUT POWER
COEFFICIENT OF PERFORMANCE
COOLING MAX. CURRENT
HEATING MAX. CURRENT
MAX. PRESSURE : SUCTION
MAX. PRESSURE : DISCHARGE
REFRIGERANT
SERIAL No.
Manufacturer
Address
Year
Insulation material
Minimum thickness [mm]
70%
75%
80%
or more
or more
or more
8
10
13
9
11
14
10
12
15
10
12
16
10
13
16
CAUTION
Detail
Model name
Rated voltage, phase and frequency
Cooling capacity under cooling condition
Electric current during cooling operation under
cooling condition
Input during cooling operation under cooling
condition
Ratio of output cooling energy to electrical input
energy
Heating capacity under heating condition
Electric current during heating operation
under heating condition
Input during heating operation under heating
condition
Ratio of useful output per the amount of input
energy
Maximum current of cooling
Maximum current of heating
Maximum pressure of the suction port
Maximum pressure of the air outlet
Refrigerant type and initial charging amount
Serial number
Manufacturer
Manufacturer address
Manufacture year
85%
or more
17
18
19
20
21
En-10