AEG 11602 G Manual de funcionamiento e instalación - Página 7

Navegue en línea o descargue pdf Manual de funcionamiento e instalación para Placa AEG 11602 G. AEG 11602 G 26 páginas. Gas hob
También para AEG 11602 G: Instrucciones de uso e instalación (27 páginas)

Imprimir página

Operation

HOB BURNERS

To light a burner, turn the relevant control knob anticlockwise to the

maximum position. At the same time push the electric ignition button

which is marked with a little spark. Then adjust the flame as required.

If the burner does not ignite, turn the control knob to zero, and try

again.

When switching on the mains, after installation or a power cut, it is

quite normal for the spark generator to be activated automatically.

To ensure maximum burner efficiency, you should only use pots and

pans with a flat bottom fitting the size of the burner used (see table).

Burner

Large (rapid)

Medium (semi-rapid)

Small (Auxiliary)

As soon as a liquid starts boiling, turn down the flame so that it will

barely keep the liquid simmering.

If you use a saucepan which is smaller than the recommended size,

the flame will spread beyond the bottom of the vessel, causing the

handle to overheat.

Take care when frying food in hot oil or fat, as the overheated

splashes could easily ignite

If the control knobs become difficult to turn, please contact your local

AEG Service Force Centre.

minimum

maximum

diameter

160 mm.

240 mm.

120 mm.

220 mm.

80 mm.

160 mm.