AEG 24" HK654070XB Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Placa AEG 24" HK654070XB. AEG 24" HK654070XB 20 páginas. 24” electric cooktop
También para AEG 24" HK654070XB: Manual del usuario (19 páginas), Manual del usuario (16 páginas), Manual del usuario (40 páginas)

Imprimir página

Problem

There is a dark area on

the multiple zone.

The sensor fields become

hot.

There is no signal when you

touch the panel sensor

fields.

comes on.

and a number come on.

7.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Give also

three digit letter code for the glass

ceramic (it is in the corner of the glass

8. INSTALLATION

WARNING!

Refer to Safety chapters.

8.1 Before the installation

Before you install the hob, write down

the information bellow from the rating

plate. The rating plate is on the bottom

of the hob.

Serial number ...........................

Possible cause

It is normal that there is a

dark area on the multiple

zone.

The cookware is too large or

you put it too near to the

controls.

The signals are deactivated.

Automatic Switch Off oper-

ates.

The Child Safety Device or

the Lock function operates.

There is an error in the hob.

surface) and an error message that

comes on. Make sure, you operated the

hob correctly. If not the servicing by a

service technician or dealer will not be

free of charge, also during the warranty

period. The instructions about the

Service Centre and conditions of

guarantee are in the guarantee booklet.

8.2 Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in

units and work surfaces that align to the

standards.

8.3 Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable

use the following (or higher) mains

ENGLISH

Remedy

Put large cookware on the

rear zones if possible.

Activate the signals.

Refer to "Daily use" chapter.

Deactivate the hob and acti-

vate it again.

Refer to "Daily use" chapter.

Disconnect the hob from the

electrical supply for some

time. Disconnect the fuse

from the electrical system of

the house. Connect it again.

comes on again, speak

to an Authorised Service

Centre.