Brother MFC-J625DW Manual de configuración rápida - Página 26

Navegue en línea o descargue pdf Manual de configuración rápida para Impresora todo en uno Brother MFC-J625DW. Brother MFC-J625DW 37 páginas. Product safety guide - spanish
También para Brother MFC-J625DW: Manual (12 páginas), Manual (21 páginas), Manual de seguridad del producto (17 páginas), Manual de seguridad (17 páginas), Manual de solución de problemas (6 páginas), Instrucciones de configuración inalámbrica (3 páginas), (Spanish) Guía De Configuración Rápida (36 páginas), (Español) Manual (21 páginas), (Español) Manual (16 páginas)

Imprimir página
Brother MFC-J625DW Manual de configuración rápida
For Wireless Network Users
One-push configuration
19
using WPS or AOSS™
(Windows
Macintosh)
a
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
c
On your machine, press Menu.
Press s or t to display Network.
Press Network.
Press s or t to display WPS/AOSS.
Press WPS/AOSS.
When Enable WLAN? is displayed, press Yes
to accept.
This will start the wireless setup wizard.
To cancel, press No.
Note
If your wireless access point/router supports WPS
(PIN Method) and you want to configure your
machine using the PIN (Personal Identification
Number) Method, see Configuration using the
PIN Method of Wi-Fi Protected Setup in the
Network User's Guide.
d
When the LCD shows Start WPS or AOSS,
press the WPS or AOSS™ button on your
wireless access point/router. See the user's
guide of your wireless access point/router for
instructions.
Then press OK and your machine will now
automatically detect which mode (WPS or
AOSS™) your wireless access point/router
uses and try to connect to your wireless
network.
26
®
and
e
A connection result message appears for
60 seconds on the LCD and a wireless LAN
report will automatically be printed.
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
on page 27.
Wireless setup is now complete. A four
level indicator at the upper left of your
machine's LCD will show the wireless
signal strength of your access
point/router.
To install MFL-Pro Suite, continue to
step 20.
®
For Windows
Users:
Now go to
Page 29
For Macintosh Users:
Now go to
Page 32