Brother Work Smart MFC-J470dw Manual de inicio rápido - Página 5

Navegue en línea o descargue pdf Manual de inicio rápido para Impresora todo en uno Brother Work Smart MFC-J470dw. Brother Work Smart MFC-J470dw 35 páginas. Printers
También para Brother Work Smart MFC-J470dw: Manual Air Print (12 páginas), Manual del usuario avanzado (48 páginas), Especificaciones (2 páginas), Manual de inicio rápido (35 páginas), Manual de configuración rápida (37 páginas)

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a counterclockwise until it

clicks to release the vacuum seal. Then

remove the orange protective packing a as

shown.

IMPORTANT

• DO NOT shake the ink cartridges. If ink stains

your skin or clothing, wash with soap or

detergent at once.

• DO NOT touch the cartridge in the area

indicated b, as this can cause the machine not

to function with the cartridge.

Take care to match the sticker colour a with

the cartridge colour b as shown in the diagram

below.

Install each ink cartridge in the direction of the

arrow on the label.

Gently push the back of the ink cartridge

marked "PUSH" until the cartridge lever lifts.

After all the ink cartridges are installed, close

the ink cartridge cover.

IMPORTANT

After initial installation of the ink cartridges, the

machine will start cleaning the ink tube system.

This cleaning process will last approximately four

minutes.

DO NOT unplug the machine from the power

outlet or attempt to stop the cleaning process.

Interruption of cleaning process may cause

undesired print quality problems.