Brother Work Smart MFC-J475dw Manual de inicio rápido - Página 5
Navegue en línea o descargue pdf Manual de inicio rápido para Impresora todo en uno Brother Work Smart MFC-J475dw. Brother Work Smart MFC-J475dw 35 páginas. Work smart series inkjet all-in-one
También para Brother Work Smart MFC-J475dw: Manual Air Print (12 páginas), Especificaciones (2 páginas), Manual de configuración rápida (37 páginas)
Imprimir página
d
Unpack the ink cartridge.
Turn the green release lever on the orange
protective packing a counterclockwise until it
clicks to release the vacuum seal. Then
remove the orange protective packing a as
shown.
IMPORTANT
• DO NOT shake the ink cartridges. If ink stains
your skin or clothing, wash with soap or
detergent at once.
• DO NOT touch the cartridge in the area
indicated b, as this can cause the machine not
to function with the cartridge.
2
1
2
1
e
Take care to match the sticker colour a with
the cartridge colour b as shown in the diagram
below.
Install each ink cartridge in the direction of the
arrow on the label.
f
Gently push the back of the ink cartridge
marked "PUSH" until the cartridge lever lifts.
After all the ink cartridges are installed, close
the ink cartridge cover.
IMPORTANT
After initial installation of the ink cartridges, the
machine will start cleaning the ink tube system.
This cleaning process will last approximately four
minutes.
DO NOT unplug the machine from the power
outlet or attempt to stop the cleaning process.
Interruption of cleaning process may cause
undesired print quality problems.
1
2
5