AEG 65300 K Instrucciones de uso - Página 27

Navegue en línea o descargue pdf Instrucciones de uso para Placa AEG 65300 K. AEG 65300 K 40 páginas. Ceramic glass hob

What to do if ...

A fault may have been caused by a minor operating error, which you

can correct yourself with the help of the following instructions. Do not

attempt any further repairs if the following instructions do not help in

each specific case.

Warning! Repairs to the appliance should only be carried out by

approved service engineers. Improper repairs can cause injury or mal-

function. If your appliance needs repairing, please contact your local

AEG Service Force Centre.

What to do if ...

.... the cooking zones do not work?

Check whether

– the mains fuse (fuse box) is intact. If the fuse blows several times,

please call an approved electrician.

– that the appliance is correctly connected and is switched on,

– indicators on the control panel illuminate,

– the corresponding cooking zone is switched on,

– the cooking zones are set to the desired heat setting for cooking (see

section: "Cooking"),

– the cooking zones have been switched off by the safety switch

(see section: "Safety Functions").

.... the cooking zones cannot be switched on?

Check whether

– the control panel is locked (see section: "Locking/Unlocking

the Control Panel").

– more than 10 seconds have elapsed between operating the On/Off

button and switching on the desired cooking zone, (see section:

"Switching on the Appliance").

– the touch switches are partially covered by a damp cloth or liquid.

What to do if ...