AEG 6531 DG Libro de instrucciones - Página 7

Navegue en línea o descargue pdf Libro de instrucciones para Placa AEG 6531 DG. AEG 6531 DG 10 páginas.

Imprimir página

The unit´s externally

measured length

145 mm:

Cooker hood

290 mm:

Two-zone ceramic-top electric hob

Two-burner gas hob

Grill

Fryer

Wok

580 mm:

Four-zone ceramic-top electric hob

Four-burner gas hob

725 mm:

Four-zone ceramic-top electric hob

Installation of a single unit

When mounting a single unit, be it a

half-or full size unit, in a table surface

which is thicker than 30 mm, it is

necessary to make a special notch in

both sides of the cut-out hole, as

shown in the adjacent drawing.

The purpose of these notches is to

create space for the electrical cables.

Burner ring/cover

Together with the burner ring the burner

ring/cover forms a space where the final

mixture of gas and air takes place in

order to make the gas burn correctly.

Please note: It is consequently very

important that the individual burner

cover/ring is placed correctly on the

burner.

If the burner ring/cover are wrongly

placed the burner will operate

incorrectly, and the burners may be

damaged within at short space of time.

Ignition electrode (A)

Each burner has been provided with an

ignition electrode. As long as the

operating knob is depressed, the

automatic ignition will ensure that a

spark is emitted between the ignition

electrode and the burner cover.

Thermo Sensor (B)

The hob unit features fully-secured gas

taps (thermo-fuse)

In case the flame goes out, the thermo

sensor automatically prevents gas

admission after a shorter time (max. 90

seconds).

Note: Gas admission is always allowed

while the operation button is pressed -

See start-up procedure

Burner

Main nozzle

Burnercover