AEG 66300 K-IN Manual de instrucciones de instalación y funcionamiento - Página 24
Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Placa AEG 66300 K-IN. AEG 66300 K-IN 31 páginas. Ceramic glass hob
También para AEG 66300 K-IN: Manual de instrucciones de instalación y funcionamiento (40 páginas)
Imprimir página
• In order to facilitate access if servicing is required, there must be a
space the size of the cut-out section in the worktop and 150mm high
under the hob. Anything installed in this area, e.g. anti-shock protec-
tion, must be easily removable.
Sticking the seal in the rabbet
• Clean the rabbet in the work surface.
• Stick the one-sided self-adhesive sealing tape supplied onto the up-
per surface of the rabbet along the edges of the cut-out section.
– Cut the sealing tape into four pieces relating to the length of the
edges of the rabbet.
– For the four corners of the rabbet the ends of the sealing tapes
must be cut into mitres. Do not stick the ends over one another.
– Stick the sealing tape flush into the corner of the rabbet, so that no
silicon compound can get under the glass ceramic when grouting.
– Don't stretch the tapes when sticking them on.
24