Brother DCP-J100 Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Impresora Brother DCP-J100. Brother DCP-J100 25 páginas. Color multi-function printer
También para Brother DCP-J100: Manual del usuario avanzado (44 páginas), Manual del usuario (48 páginas), Manual de seguridad del producto (18 páginas)

Gently push the back of the ink cartridge

marked "PUSH" until the cartridge lever lifts.

After all the ink cartridges are installed, close

the ink cartridge cover.

NOTE

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine. We

recommend you perform the next step while

waiting.

Load plain A4 paper

Pull the paper tray completely out of the

machine.

Open the output paper tray cover.

Gently press and slide the paper width

guides a and then the paper length guide b to

fit the paper size.

Make sure that the triangular marks c on the

paper width guides a and paper length

guide b line up with the mark for the paper size

you are using.

Fan the stack of paper well to avoid paper jams

and misfeeds.

NOTE

Always make sure that the paper is not curled or

wrinkled.

Gently put the paper into the paper tray print

side down and top edge first. Check that the

paper is flat in the tray.

IMPORTANT

Be careful that you do not push the paper in too

far; it may lift at the back of the tray and cause

paper feed problems.