AEG 88900K Manual de instrucciones de instalación y funcionamiento - Página 33
Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Placa AEG 88900K. AEG 88900K 44 páginas. Ceramic glass induction hob
Imprimir página... the cooking zones will not switch on.
Check whether
– the operating panel is locked (see chapter "Locking the operating
panel").
– a period of more than 10 seconds elapses after operating the "On/
Off" switch and before the selected cooking zone comes on (see
chapter "Switching on the appliance".)
– the sensor fields may be partially covered by a damp cloth or by liq-
uid.
... the residual heat indicator suddenly fails to operate except for
_ or h.
Check whether
– the "On/Off" switch was activated by mistake.
– the sensor fields may be partially covered by a damp cloth, liquid or
similar.
– the safety shut-down was activated.
... the letter _ or h is still displayed by the residual heat indicator
after switching off the cooking zones.
Check whether
– the cooking zone has only been on for a short time and is therefore
not yet hot enough.
If the cooking zone is hot, please ring customer service.
... a cooking zone cannot be switched off
Check whether
– the sensor fields may be partially covered by a damp cloth or by liq-
uid.
– the lock mechanism is switched on.
... a cooking zone cannot be switched on
Check whether
– the lock mechanism is switched on.
... the indicator f is flashing
Check whether
– the pan is located on the correct cooking zone,
– the diameter of the pan base is too small for the cooking zone,
– the pan is suitable for induction.
33