Brother DCP-J515W Manual del usuario avanzado - Página 19
Navegue en línea o descargue pdf Manual del usuario avanzado para Impresora Brother DCP-J515W. Brother DCP-J515W 40 páginas.
También para Brother DCP-J515W: Manual de configuración rápida (35 páginas)
Imprimir página
Enhance Photos
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge
the view of the image by pressing +. To go
back to the original size, press + again.
• The Enhance Photos feature is
supported by technology from Reallusion,
Inc.
Auto Correct
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Auto Correct.
Press OK.
Note
• If Remove Red-Eye appears on the LCD,
press a to attempt to remove red-eye from
your photo.
• Press Clear to undo the effect.
e
Press OK. Then press + or - repeatedly
to enter the number of copies you want.
Printing photos from a memory card or USB Flash memory drive
f
Do one of the following:
4
Enhance Skin-Tone
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
colour in your photos and adjusts the image.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
4
Press
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Enhance Skin.
Press OK.
e
Do one of the following:
f
Press + or - repeatedly to enter the
number of copies you want.
g
Do one of the following:
Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 20.)
If you do not want to change any
settings, press Colour Start to print.
(PHOTO CAPTURE).
Press OK if you do not want to
change any settings.
Press a or b to adjust the effect level
manually. Press OK when you have
finished.
Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 20.)
If you do not want to change any
settings, press Colour Start to print.
4
4
15