Brother DCP-J525W Manual de configuración rápida - Página 3

Navegue en línea o descargue pdf Manual de configuración rápida para Impresora Brother DCP-J525W. Brother DCP-J525W 32 páginas.

With both hands, gently press and slide the

paper side guides a and then the paper length

guide b to fit the paper size.

Make sure that the triangular marks c on the

paper side guides a and paper length guide b

line up with the mark for the paper size you are

using.

Fan the stack of paper well to avoid paper jams

and misfeeds.

Note

Always make sure that the paper is not curled or

wrinkled.

Gently put the paper into the paper tray print

side down and top edge first. Check that the

paper is flat in the tray.

IMPORTANT

Be careful that you do not push the paper in

too far; it may lift at the back of the tray and

cause paper feed problems.

Gently adjust the paper side guides to the

paper with both hands. Make sure that the

paper side guides touch the edges of the

paper.

Close the output paper tray cover.

Slowly push the paper tray completely into the

machine.

While holding the paper tray in place, pull out

the paper support a until it clicks, and then

unfold the paper support flap b.