AEG 96300KA?mn Manual de funcionamiento e instalación - Página 34

Navegue en línea o descargue pdf Manual de funcionamiento e instalación para Placa AEG 96300KA?mn. AEG 96300KA?mn 40 páginas. Ceramic glass cooking surface

Imprimir página

Safety Instructions for the Installer

• A device must be provided in the electrical installation which allows the

appliance to be disconnected from the mains at all poles with a contact

opening width of at least 3 mm.

Suitable isolation devices include line protecting cut−outs, fuses (screw type

fuses are to be removed from the holder), earth leakage trips and contac−

tors.

• In respect of fire protection, this appliance corresponds to type Y (EN 60

335−2−6). Only this type of appliance may be installed with a high cupbo−

ard or wall on one side.

• It is not permitted to fit drawers below the cooking surface.

• Protection against electric shock must be provided by the installation.

• The kitchen unit in which the appliance is fitted must satisfy the require−

ments of DIN 68930 in respect of stability.

• Built−in ovens and cooking surfaces are fitted with special connector sy−

stems. They may only be combined with appliances with a matching system.

• All cut surfaces are to be sealed with a suitable sealant for protection

against moisture.

• On tiled work surfaces, the joints in the area where the hob sits on the sur−

face must be completely filled with grout.

• Ensure that the seal is correctly seated in the frame and that it is seated

against the work surface without leaving any gaps. Additional silicon sea−

lant must not be applied, this will make removal more difficult in the event

of the need for service.