AEG 99852 G Manual de instrucciones - Página 22

Navegue en línea o descargue pdf Manual de instrucciones para Placa AEG 99852 G. AEG 99852 G 24 páginas. Electrolux gas hob operating instructions 99852 g
También para AEG 99852 G: Folleto y especificaciones (12 páginas), Manual de instrucciones (24 páginas)

Imprimir página

Instructions for the Installer

Commissioning

When the hob has been fully installed it will be necessary to check the minimum flame setting. To

do this, follow the procedure below.

1) Turn the gas tap to the MAX position and ignite.

2) Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX

several times. If the flame is unstable or is extinguished follow the procedure below.

Procedure:

1) Re-ignite the burner and set to MIN.

2) Remove the control knob.

3) To adjust, use a thin bladed

screwdriver and turn the adjustment

screw (see diagram) until the flame

is steady and does not extinguish,

when the knob is turned from MIN

to MAX. Repeat this procedure for

all burners.

Pressure Testing

1) Remove left hand pan support and front left burner cap and crown.

2) Fit manometer tube over the injector.

3) Turn on the burner gas supply and ignite another burner supply.

The pressure reading should be nominally 20mbar and must be between 17 mbar

and 25mbar.

4) Turn off the burner supplies.

Minimum adjustment screw