Brother GT-3 Series Manual de mantenimiento - Página 3

Navegue en línea o descargue pdf Manual de mantenimiento para Impresora Brother GT-3 Series. Brother GT-3 Series 16 páginas. Cookbook maintenance
También para Brother GT-3 Series: Manual de instrucciones (15 páginas), Manual de instrucciones (12 páginas), Manual de instrucciones (18 páginas), Manual de referencia (8 páginas), Manual de referencia (8 páginas), Manual (3 páginas), Instale (4 páginas), Manual de mantenimiento (17 páginas)

Imprimir página
Brother GT-3 Series Manual de mantenimiento
Shaking White Ink
>
The White ink contains titanium dioxide which helps provide vibrancy.
This will separate after being stationary for more than eighteen hours.
Dull prints will result if the ink is not agitated before use. Put the white ink cartridge
upside down and shake it side to side and tip end over end for 45-60 seconds.
+
> No matter if you will have to do the
White Tube Flush
>
If the printer has
day before...
minimum
+
If the printer has
18H
White Agitation
>
If the printer has printed with white ink a minimum of 15 T-shirts the day
before...
minimum
-
If the printer has printed with white ink within the last eighteen hours...
18H
> TIP
+
&
NZC
PHC
WTF
NOT
printed with white ink a minimum of 15 T-shirts the
NOT
printed with white ink within the last eighteen hours
>
Then the
Firmware version 3.00 or higher
>
Then the
directly after the
After performing the daily maintenance on the white ink,
a nozzle check should be printed to verify the print quality !
WA
, you must
or
must be performed after the
WTF
could be performed instead of
WA
SWI

DAILY MAINTENANCE

SWI
BEFORE !
SWI
WTF
minimum
minimum
2