Brother GT-3 Series Manual de mantenimiento - Página 7

Navegue en línea o descargue pdf Manual de mantenimiento para Impresora Brother GT-3 Series. Brother GT-3 Series 17 páginas. Cookbook maintenance
También para Brother GT-3 Series: Manual de mantenimiento (16 páginas), Manual de instrucciones (15 páginas), Manual de instrucciones (12 páginas), Manual de instrucciones (18 páginas), Manual de referencia (8 páginas), Manual de referencia (8 páginas), Manual (3 páginas), Instale (4 páginas)

> MONTHLY MAINTENANCE PROCEDURE

Monthly Maintenance has to be performed on top of the Daily & Weekly Maintenance.

The purpose is to keep the printer in the best status for printing without problems.

Remenber that it is better to spent 15 minutes every month than to be with machine

down for several days !

We recommend you to do the cleaning and greasing of the CR shaft, cleaning CR rail

and a good visual inspection of the printer.

Add also a little bit of Molykote 30 grease at the bronze sprocket of the CR Motor.

SPARE PARTS NUMBER:

After cleaning & greasing the Carriage Shaft, please,perform a CR Speed

Adjustment on the machine !

CLEAN the rail with ALCOHOL 95°

Reattach both felt supports and tighten the knob screw.

CARRIAGE SHAFT CLEANING & GREASING

MOLYKOTE 30

SB3229001

MONTHLY MAINTENANCE

Pour alcohol (95% or higher) on a cloth and

clean the carriage shaft thoroughly.

When clean, coat the shaft with Molykote 30

white grease.

Don't forget to grease between the 2 bearings

in the middle of the carriage.

Unscrew the knob on the felt supports and

remove them.

Pour a little alcohol (95% or higher) on a

cloth and clean the rail thoroughly.

Remove and replace the felts on the bottom

of the felt supports in accordance with the

"Maintenance Parts Exchange".