AEG CDE84779FB Manual del usuario - Página 20

Navegue en línea o descargue pdf Manual del usuario para Placa AEG CDE84779FB. AEG CDE84779FB 32 páginas.
También para AEG CDE84779FB: Manual del usuario (32 páginas)

Imprimir página

Incorrect cookware position:

FlexiBridge Max Bridge mode

To activate the mode press

the correct mode indicator

connects all sections into one cooking area.

To set the heat setting use any of the two

control bars on the left side.

Correct cookware position:

Make sure to place the cookware on the four

connected sections. If you use cookware

smaller than three sections the control bar

blinks and after 2 minutes the zone switches

off.

Incorrect cookware position:

ENGLISH

until you see

. This mode

PowerSlide

This function allows you to adjust the

temperature by moving the cookware to a

different position on the induction cooking

area.

• The function divides the induction cooking

area into three areas with different heat

settings. The hob detects the position of

the cookware and adjusts the heat setting

corresponding with the position.

• You can place the cookware in the front,

middle or rear position. If you place the

cookware in the front you get the highest

heat setting. To decrease it, move the

cookware to middle or rear position.

• When you activate the function for the first

time you will get the following default heat

settings: 9 for the front position, 6 for the

middle position and 3 for the rear position.

• You can change the heat settings for each

position separately. The hob will

remember your heat settings next time

you activate the function.

• The heat setting display of the left front

control bar shows the heat setting for this

function. To change the heat setting use

the left front control bar only. The left

rear control bar is deactivated while the

function operates.

In some models there are two flexible

cooking areas, left and right. To operate

PowerSlide on the right side, use the

right front control bar.