AC Pro ACAT60H/NaA Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Aire acondicionado AC Pro ACAT60H/NaA. AC Pro ACAT60H/NaA 16 páginas.

4.1.3 Codes & Regulations

This product is designed and manufactured to comply with national codes. It is

installer's responsibilities to install the product in accordance with such codes and/or

any prevailing local codes/regulations. The manufacturer assumes no responsibilities

for equipment installed in violation of any codes or regulations.

These instructions are intended as a general guide and do not supersede local or

national codes in any way. Authorities who have jurisdiction should be consulted before

installation.

4.1.4 Replacement Parts

When reporting shortages or damages, or ordering repair parts, give the complete

product model and serial numbers as stamped on the product. Replacement parts for

this product are available through your contractor or local distributor.

4.2 Location

outdoors.

When installing the coil, take consideration to minimize the length of refrigerant

tubing as much as possible. Do not install the air handler in a location either above or

below the condenser that violates the instructions provided with the condenser. Service

clearance is to take precedence. Allow a minimum of 24" in front of the unit for service

clearance. When installing in an area directly over a finished ceiling (such as an attic),

an emergency drain pan is required directly under the unit. See local and state codes

for requirements. When installing this unit in an area that may become wet, elevate the

unit with a sturdy, non-porous material. In installations that may lead to physical

damage (i.e. a garage) it is advised to install a protective barrier to prevent such

damage.

4.3.1 Specification of Connection Pipe

Model

ACAT24F/NaA

ACAT48H/NaA

This coil is designed for indoor installation only. Do not install it

ACAT36F/NaA

ACAT60H/NaA

External diameter (inch)

Gas pipe

Φ3/4

A-Coils

Liquid pipe

Φ3/8