LG 216SC Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Monitor LG 216SC. LG 216SC 33 páginas. Color monitor

Connecting the Monitor

On the back of the monitor are three plug-in connections; one for the

AC power cord, and the others for the signal cable from the video card.

1. AC Power Connection

One end of the AC power cord is connected into the AC power connector

on the back of the monitor. The other end is plugged into a properly

grounded three-prong AC outlet. The monitor's auto-sensing power supply

can automatically detect 100-120V AC or 200-240V AC, 50 or 60Hz.

2. Signal Cable Connection

The connectors for the signal cable are located on the back of the

monitor. The BNC and 15 pin VGA connectors on the back of the

monitor allow for a wide variety of video controllers to be connected to

the monitor. Examples of signals that might be sent to the monitor

include signals from IBM PC and compatibles, Apple Macintosh,

Centris, Quadra, and SPARC workstations.

The supplied signal cable consists of 15 pin VGA connectors at both

ends, suitable for connections to an IBM PC or compatible.

Other generic cables or adapters may be used for connections to your

equipment, as long as they meet the compatible signal requirements

to activate this monitor (see page A24 for specifications). For Apple

Macintosh use, a separate plug adapter is needed to change the 15

pin high density (3 row) D-sub VGA connector on the supplied cable

to a 15 pin 2 row connector. Examples of typical connections are

shown below. Select the connection example that fits your needs.