Brother SP-1 Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Impresora Brother SP-1. Brother SP-1 4 páginas.

Quick Setup Guide

Read the Product Safety Guide ﬁrst, then read this Quick Setup Guide for the correct installation procedure.

SP-1

Unpack the machine and check the components

Remove the protective tape or ﬁlm covering the machine and the supplies. The components included in the box may differ depending on your country.

Load plain Sublimation paper in the paper tray

Pull the paper tray

Fan the paper well and load it in

completely out of the

the tray.

machine.

NOTE

Place the printing surface face down.

When loading Brother Sublimation

Paper, make sure the paper's cut

corner rests in the lower right of the

tray, as shown in the illustration.

Connect the

power cord

NOTE

You can adjust the control panel angle to read the LCD more easily.

To maintain print quality, keep your machine

connected to a power source all the time so that

the machine can clean the print head periodically.

Set the date and time

Follow the LCD instructions to set the date and time.

After setting the date and time, you can set the

Firmware Update defaults.

The latest manuals are available at the Brother support website:

https://s.brother/cm2ab/

Adjust the paper guides.

Install the starter ink cartridges

Open the ink cartridge cover.

Check the print quality

Follow the LCD instructions, and then

press the [OK] or c. The machine

prints the Print Quality Check Sheet.

Manuals in Spanish for this model are available at https://s.brother/cm2ab/.

Manuales en Español para este modelo están disponibles en https://s.brother/cm2ab/.

NOTE

• Save all packing materials and the box in case you must ship your machine.

• If you use a wired connection, you must purchase the correct interface cable for the

interface you want to use.

USB Cable

Use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long.

Ethernet (Network) cable

Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX

Fast Ethernet Network.

For more information about paper handling and sizes, see the Online

User's Guide at https://s.brother/cm2ab/.

Slowly push the paper tray

completely into the machine.

Quickly shake all of

the ink cartridges

horizontally 15 times as

shown, before inserting

it into the machine.

Follow the LCD instructions to check the

quality of the four color blocks on the sheet,

and then start the cleaning procedure.

D02SC6001-00

USA/CAN

Version 0

Pull out the paper support a,

and unfold the paper support

flap b so that the printed

pages do not fall.

Follow the LCD instructions to

install the ink cartridges. Close the

ink cartridge cover. The machine

will prepare the ink tube system for

printing.

NOTE

The first time you install the ink

cartridges, the machine will use extra

ink to fill the ink delivery tubes. This is

a one-time process that enables high-

quality printing.

Poor