Brother Work Smart MFC-J475dw Manual de inicio rápido - Página 4
Navegue en línea o descargue pdf Manual de inicio rápido para Impresora Brother Work Smart MFC-J475dw. Brother Work Smart MFC-J475dw 35 páginas. Work smart series inkjet all-in-one
También para Brother Work Smart MFC-J475dw: Manual Air Print (12 páginas), Especificaciones (2 páginas), Manual de configuración rápida (37 páginas)
Imprimir página
Set your country
3
(Australia and New
Zealand only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
After connecting the power cord, the LCD
shows:
Press a or b to choose your country.
Press OK.
b
Press a or b to choose Yes or No.
Press OK.
c
After the LCD shows Accepted for a few
seconds, the machine will restart automatically.
4
Choose your language
(Hong Kong only)
a
Press the desired language.
Press OK.
b
Press a or b to choose Yes or No.
Press OK.
NOTE
If you set the wrong language, you can change it
later. See Choose your language (if needed)
(Hong Kong only) on page 8.
4
5
Install the ink cartridges
CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
NOTE
Make sure you install the Starter Ink Cartridges
included with your machine first.
a
Make sure that the power is turned on.
The LCD will show No Ink Cartridge.
b
Open the ink cartridge cover a.
c
Remove the orange protective part a.
NOTE
Do not throw away the orange protective part.
You will need it if you transport the machine.
1
1