Fujitsu Lifebook A3130 Manual de introducción

Navegue en línea o descargue pdf Manual de introducción para Portátil Fujitsu Lifebook A3130. Fujitsu Lifebook A3130 2 páginas. Lifebook a series
También para Fujitsu Lifebook A3130: Manual Bios (31 páginas)

Imprimir página

Getting started with your new

Fujitsu LifeBook

This convenient guide will lead you through the start-up process in four easy steps and will also offer some valuable tips.

LifeBook Application Panel

and Volume Buttons

Touchpad Pointing Device

(Optional Point and Write Pad)

Left Stereo

Speaker

Status Indicator

Panel

Wireless LAN/Bluetooth

On/Off Switch

Headphone/Line-Out Jack

Microphone /Line-In Jack

* Scroll/Fingerprint Sensor

Right Stereo Speaker

1. What's in the Box

Check to see that all of the following are in the box:

❍ LifeBook notebook

❍ Microsoft

associated

❍ Lithium ion battery,

product materials

❍ Microsoft

pre-installed

application CDs

❍ AC adapter with power cord

❍ End User License Agreement

❍ Phone/modem (RJ-11)

❍ Recovery and utility disc

❍ Genuine Windows Vista®

telephone cable

❍ Drivers and Applications

recovery and utility disc

❍ Genuine Windows® XP

Restore (DAR) disc

❍ User's Guide

recovery and utility disc

❍ International Limited Warranty

(For Genuine Windows

and Registration booklet

Vista® Business Operating

System)

Depending upon your conﬁ guration, the following

may also be included:

❍ Roxio Easy Media Creator disc (See Readme ﬁ le on disc

for installation instructions)

❍ CyberLink PowerProducer, PowerDirector disc

❍ CyberLink MakeDVD disc (Only with Genuine

Windows Vista® Home Premium)

❍ Additional Lithium ion battery

❍ Remote Control, Remote Control manual, batteries,

and USB IR receiver (for Windows Vista™

Home Premium Operating System only)

❍ Stylus in pen garage (with Point and Write Pad only)

A3130 notebook

Display Panel Latch

Display Panel

Status Indicator

Panel

Power/Suspend/

Resume Button

Keyboard

2. Turn on Your Notebook

•

Plug the AC adapter into your notebook.

•

Plug the power cord into the AC adapter.

•

Connect the power cord to an electrical outlet.

•

Connect the phone cord or an ethernet cable to your

notebook and to a wall jack.

•

Press the power button (above the keyboard) to turn

on the notebook.

•

The notebook is now on and the battery is being charged.

•

The notebook will begin a power-on self test. Once

successfully completed, the operating system will

begin the initialization process. The screen will go dark

for approximately two minutes.

3. Register

•

Enter the information as prompted to personalize your notebook

and conﬁ gure your modem to dial.

•

website at us.fujitsu.com/computers.

4. Activate Additional Utilities

After the ﬁ rst boot setup has run, the "Primary Settings for the PC"

window will appear. It explains about installations and setups that

can be done by "ClickMe!"

If the Execute button in the window

is clicked, installations and setups will start. However, after clicking

the button, a "User Account Control" window will appear asking

your permission to run "ClickMe!" If you click the Continue button,

"ClickMe!" runs. If canceled, the "ClickMe!" desktop icon will appear

on the desktop so you can run "ClickMe!" later. Right click the Fujitsu

Update Utility (FDU)

icon and follow the on-screen instructions

to update your drivers. For more information, see your User's Guide.

RIGHT PANEL

ExpressCard Slot

ExpressCard Eject Button

PC Card Eject Button

PC Card Slot

LEFT PANEL

Optical Drive Eject Button

Stylus (For optional ﬂ at point

digitizer only)

Air Vents

Optical Drive

BACK PANEL

Anti-Theft Lock Slot

2 USB 2.0 Ports

Gigabit LAN Jack (RJ-45)

Air Vents

S-Video Out Port

2 USB 2.0 Ports

External Video Port

Following are some common indicators

Status Indicators

Battery Level

Front

Solid Green: 51% to 100%

Power

charged

Visible when notebook is on

Solid Orange: 13% to 50%

Battery Charging

Solid Red: 0% to 12%

Solid Green: Fully charged

or no battery pack installed

Blinking Orange: Measuring

battery status

Solid Orange: Charging

Blinking Red: Battery

Blinking Orange: Charging

problem

is suspended

Off: No battery installed

Off: No AC adapter

Quick Tips

USB 2.0 Port

It takes approximately 3.6 hours

to charge the 6 cell battery if

the notebook is turned off

or in suspended mode, or up

DC Power Jack

to 11 hours if the notebook

is being used.

IEEE 1394 Port

Optimizing Battery Life

• Adjust display brightness levels

SD Card/Memory Stick

to lowest comfortable setting

• Remove PC Cards and Express-

xD Card Slot

Cards when not needed

• Utilize Sleep mode when

not using your notebook

• Turn-off Wireless LAN when

not in use

• Close unused programs

• Remove unused USB

powered devices

• Read the Power Management

section in your User's Guide

for additional features

Adjusting display brightness

• Fn + F6 to decrease brightness

• Fn + F7 to increase brightness

Emergency Tray Release

Adjusting volume

• Fn + F8 to decrease volume

• Fn + F9 to increase volume

Drivers

Look for the latest drivers on the

Drivers and Applications Restore

disc. Right-click the FDU icon

and select "update", or go to

us.fujitsu.com/computers.

Stylus (for optional ﬂ at point digitizer only)

Modem Jack (RJ-11)

Top of Keyboard

Status Indicators

HDD/ODD Access

Indicates HD or CD access

Top of keyboard

Number Lock

Visible when in use

Caps Lock

Visible when in use

Front Status

Scroll Lock

Indicators

Visible when active window

is locked