Fujitsu Lifebook C2010 Manual Bios - Página 13

Navegue en línea o descargue pdf Manual Bios para Portátil Fujitsu Lifebook C2010. Fujitsu Lifebook C2010 31 páginas. Bios setup utility
También para Fujitsu Lifebook C2010: Manual de software (39 páginas)

Imprimir página

1. Fujitsu Lifebook

Serial/Parallel Port Configuration Submenu of the Advanced Menu

The Serial/Parallel Port Configuration submenu

provides the ability to set the I/O addresses and inter-

rupt levels for the serial (infrared) and parallel ports of

your notebook.

P O I N T S

To prevent IRQ and address conflicts, avoid changing

the default settings. If you must change the settings,

you can call 1-800-8FUJITSU for technical assistance.

The BIOS will warn you of a resource conflict by plac-

ing a yellow asterisk next to each device that is in

conflict.

All I/O addresses in Table 5 are in hexadecimal.

Infrared Port:

Mode:

I/O Address:

Interrupt:

I/O Address:

DMA Channel:

Parallel Port:

Mode:

I/O Address:

Interrupt:

Help

ESC

Exit

PhoenixBIOS Setup Utility

Advanced

Serial/Parallel Port Configurations

Select Item

-/Space

Select Menu

Figure 5. Serial/Parallel Port Configuration Submenu

C A U T I O N

I/O addresses, DMA channels, and Interrupt levels can

be entered in various ways, including via the BIOS setup

utility, the control software for the I/O device, or the

hardware. If any two ports or devices have the same

I/O address assigned, your notebook will not function

normally. Please keep a record of original settings

before making any changes in the event that a

restoration is required. See your hardware and software

documentation as well as the setup utility to determine

settings, limitations, etc.

Enabled

[FIR]

[2E8 - 2EF]

[IRQ 3]

[400 - 43F]

[DMA 3]

[Enabled]

[Bi-directional]

[378-37F]

[IRQ 7]

Change Values

Enter

Select

Sub-Menu

A d v a n c e d M e n u

Item Specific Help

[Disabled]

The port is disabled.

[Enabled]

The port is enabled

with user configuration.

[Auto]

The port is configured

depending on 'Plug &

Play OS' setting.

Setup Defaults

F10

Save and Exit